Typical applications and use- Multi-channel measurements
- Sound-field analyses
- Sound-power measurements
- Concurrent spatial and transient measurements
DesignArray microphones are designed to be mounted on large or small arrays. Such systems are typically used for measuring and locating noise sources, and here the phase match is important to get good accuracy in the measurements. An important characteristic of array microphones are precisely that the microphones are phase-matched.
40PL has a dynamic range from 32dBA to 150dB peak, the upper limit is the peak value before visible clipping
40PL has an integrated CCP preamplifier and is delivered with a built-in TEDS chip which enables it to be programmed as a complete unit. The GRAS 40PL requires a constant current power supply, e.g. the GRAS 12AL CCP Supply, or any other CCP compatible power supply. Close manufacturing tolerances together with the advantages of the TEDS chip provide the GRAS 40PL with a high degree of interchangeability; a major advantage when used in multiples forming arrays and matrices.
The low cost of the GRAS 40PL is a key consideration when setting up measurements requiring a multiplicity of concurrent transient and spatial data.
Calibrating the GRAS 40PL with a GRAS pistonphone (GRAS 42AP is recommended) is as straightforward as calibrating any other GRAS 1/4-inch microphone.
All GRAS microphones are individually checked and calibrated before leaving the factory. An individual calibration chart is supplied with each microphone.
发表于 2018-7-26 09:54:33
